Zum Inhalt springen

Setup Huawei Smartloggger 1000 and NetEco Portal

Initial Setup

Settings and Passwords

Smartlogger 1000 Password for Initial Login direkt an Logger000001
Smartlogger 1000 Password for Initial Login via WEBServer/GUI am LaptopChangeme
German NetEco ServerIP Address52.58.164.53
German NetEco GUI Login https://52.58.164.53:8443
NetEco Paramter set in SmartLogger 1000 to transfer Data52.58.164.53 — PortNumber: 16100
DHCP Support SmartLogger 1000yes – the dynamic DHCP address used in the sample is : 192.168.2.113
Connect to local Webserveryes – by using https — Sample: https://192.168.2.113
Telekom DSL RouterSpeedport W 724 V
Telekom DSL Router IP Address192.168.2.1
Email Adress from German Huawei Supportde_inverter_support@huawei.com

Step1: Verify DHCP Connectivity of our Local Network using a Laptop

  • Connect a Laptop/Smartphone to the Local Network either via WLAN or LAN
  • On Windows use ipconfig to get the Gateway/Network IP of our router [ 192.168.2.1 for Speedport W 724 V / 192.168.1.1 for Speedport LTE II
  • Our Laptop got assigned an IP Address – 192.168.2.7 -> DHCP works
  • The router address is 192.168.2.1
  • Use a Broser and connect to http://192.168.2.1 and display the

Step 2: Initial Login to the SmartLogger 1000

  • Initial Password: 000001
  • User: Erweiterter User ( Advanced User )

Step 3: Setup SmartLogger 1000 for NetEco Portal and allow local Network Access

  • Enable DHCP by setting Auto Obtain IP from Disable to Enable
  • Set the German NetEcpo Server IP : 52.58.164.53
  • Don’t change portnumber !
  • Verify IP settings : Logger DHCP IP Address 192.168.2.113
  • Verify IP settings : Gateway/DNS IP 192.168.2.1
  • Note: IP Adresss, Gateway and DNS should be set by the DHCP Server
  • This will happen automatically if Auto Obtain IP Address is set to: Enable

Optional Step 4: Verify your IP Address by login into Router

  • Verify IP settings : Login to your Router and verify DHCP settings. For Telekom Router Speedport W724V use: IP 192.168.2.1
  • Verify IP settings : Gateway/DNS IP 192.168.2.1
  • mylaptop is our Laptopn connected via WLAN
  • PC 192-168-2-113 is the smartlogger connected via Lan b< using a DHCP address 192.168.2.113

Step 5: Zugriff an den localen WEB Server des SmartLogger 1000

  • Note: To overcome a potential Chrome Security Exception using https protocol simply select the “Advanced” link, then choose “Proceed to <link > (unsafe)

Erster Login über das https Protocol mit der zuvor bestimmten DHCP Addresse. Beispiel:
https://192.168.2.113

Benutzer: Erweiterter User

Das Default Password for das WEB GUI des Smartlogger 1000 ist: Changeme

Initial Page after Login to the SmartLogger 1000 Local Webserver

Step 6: Get Login credentials for NetEco Portal

  • Send an email to requesting a NetEco Account from Huawei : de_inverter_support@huawei.com
  • You need to provide the following Details Anlagen-Name / Portal-User / Smarlogger 1000 Seriennummer
  • Login into NetEco Portal using following URL: https://52.58.164.53:8443/index.action
  • To overcome a potential Chrome Security Exception simply choose the “Advanced” link, then choose “Proceed to <link > (unsafe)

]

Step 7: First Login into NetEco Portal

  • Top Level Page after login to the NetEco Portal

Step 8: Setup FRE

  • Zum FRE setup bitte als “Spezieller Benutzer” einloggen
  • Wirkleistungsteuerung aktivieren
  • Wirkleistung-SteuerModus: Trockenkontakt-Fernsteuerung [ strange Translation ?!?]

Monitoring Inverter Performance

Compare Inverter Performance

  • The Green and Blue INVERTER should have the same AC Power
  • Lets compare each String more in Detail
Diagram showing that both Strings perform WELL !Compare 2 Strings from 2 different Inverters

  • The orange and the blue Diagram for String PV3 of both Inverters are in sync
  • The max current of both Strings is about 4.5 Amperes
Diagram showing a REAL String ProblemCompare 2 Strings from 2 different Inverters
  • The orange and the blue String PV4 Diagram of both Inverters are NOT in sync
  • The related String PV4 of the blue Innverter shows an elektr. current of 0 Amperes for the whole DAY
  • This needs to fixed asap !

Ein neues System zum NETECO Portal hinzufügen

Unter Photovaltail-System-Übersicht den blauen Button mit Label PV-Anlagen erstellen drücken

List Elemente ausfüllern und die Smartlogger 1000 Serien-Number eingeben

  • Beachte: Eine reale Smartlogger 1000 Serien-Number ist deutlich länger !

Reference

Published inAllgemein